Sales of the new line of Full Height Rotor Turnstiles RTD-16 have started. The RTD-16 is made of metal with the use of hot dip galvanization technology which is the cost-effective solution with high resistance to corrosion.
The line of the RTD-16 Full Height Rotor Turnstiles is represented by 4 models that differ in external appearance and in rotor resetting mechanism:
|Motorized mechanism||Electromechanical mechanism||Steel rotor with powder coating||Stainless steel rotor|
In the RTD-16 there have been applied the same mechanisms and electronics as in the RTD-15 turnstiles, which have proven their quality worldwide. The operation mode of the RTD-16 and the ACS control algorithms are also identical to the mode and algorithms of the RTD-15.
The power and control cables can be routed to the RTD-16 turnstiles in two ways: from below, through the post of barrier arms, or from above, through the drive girder, which is an advantage in case of the installation of the turnstiles in a row.
Turnstiles can be installed back-to-back without gaps and transition elements, also including the case of use of the RTC-16 protective canopy. Use the WHD-16 Full Height Security Gate of the same design to organize the emergency exit, wheel-chair access and movement of bulky items; the MB-16 full height railings can be used for the organization of access control, which can be equipped with a barrier lining for the extra protection against the unauthorized access.
Once again PERCo presented its wide range of security equipment at Intersec exhibition which took place in Dubai from 22nd to 24th of January.
The following upcoming products were presented:
Besides, already known products were presented as well:
Due to the growth of production volumes PERCo continues to expand its engineering and manufacturing base. New electroerosion machine "Precision 2 Axis Wire EDM Machine ARTA 423 PRO" has been put into operation. Mechanism components of speed gates and full height turnstiles are processed by the new equipment.
New automatic band saw machine H-360 HANC (Taiwan) has been brought into operation. It is the second machine of this brand working at the plant. As a result of automatic feed and package processing of forgings this machine makes the process of high precision cutting of forgings from 2 to 3 times faster.
New semi-automatic band saw machine Pilous ARG220 Plus (Czech Republic) with turning portal has replaced the former one. There are two machines of this kind working at the plant today. Besides, new IHM -30-8-50/WS-1,2-2 induction heating unit aimed at tempering the mechanical components has recently began operations.
Regular modernization and improvement of technological processes allows PERCo plant to manufacture goods which from year to year meet world quality standards.
We are glad to announce that Ghana has become the 83rd country on PERCo sales map, expanding our distribution geography in Africa.
Our new partners in Ghana, Virtual Security Africa, have purchased speed gates ST-01 for indoor use, which will be installed in three largest banks of Ghana. One installation will be also presented in the show-room of our new partner in Africa.
PERCo equipment has been displayed at Sectech International Security Exhibition, which was held in Copenhagen at the end of November.
Our partner in Denmark, Passage Sikring Company, took a chance to participate in the event and exhibit PERCo products: ST-01 speed gate, WMD-06 glass swing gate and IC03 card capture reader. As noted by the CEO of Passage Sikring Company – Mr. Bent Thygesen – exhibition was a big success. All the equipment has given a good account of itself. As a result, Passage Sikring Company has received an order for ST-01 speed gate installation in a business centre in Copenhagen right off at the exhibition.
Following increase in sales volume, PERCo Company continues enhancing its manufacturing facilities. Another 5-Axis Vertical Machining Center MX-520 (Japan) has been recently installed in the machine workshop.
The MX-520 assures high rigidity as well as a generous machining envelope with good operability. This machine allows PERCo to fabricate high tolerance parts for the equipment, thus ensuring continuous product improvement.
The new vertical machine centre will be used to manufacture components for speed gates, tripod turnstiles and box tripod turnstiles.
PERCo full height rotor turnstiles have been installed in one of the Sorbonne universities – Université Paris II – Panthéon-Assas.
Panthéon-Assas, leading its history since the 13th century, is considered to be the best legal university in France. Presently there are about 20 000 students studying at the university.
The installation of RTD-15 turnstiles was performed by ItCotation, one of PERCo partners in France.
PERCo equipment has been displayed at the largest security exhibition in Romania ROMANIAN SECURITY FAIR held from 20 to 22 October in Bucharest.
Our partners in Romania Helios Security and Resel took part in this exhibition.
TTR-08A tripod turnstile for outdoor use with automatic anti-panic function and TTD-08А box tripod turnstile have aroused a great interest among the stand visitors.
PERCo new products were presented during the annual conference in Czech Republic held by our partner company ABBAS. The conference took place on October 13th in Mikulov.
55 specialists from partner companies of ABBAS in Czech Republic, Slovakia and Slovenia attended the conference. Technical Director, David Prachař presented PERCo new equipment: outdoor IP-stile KT-08, cost-efficient full height turnstile RTD-16, outdoor swing gate WMD-05SW and two models of speed gates - new ST-02 and a popular ST-01 which is already being sold by ABBAS.
CEO of ABBAS, Petr Kellner has pointed out the effectiveness of holding this seminar aimed at consolidation of business relationship between all involved parties: manufacturers, resellers and customers.