WMD-05S Motorized swing gate with AG-650 swing panel

Delivery set

• swing gate
• control unit
• RC-panel

Swing panel options:

• AG-650 - swing panel of 650 mm, stainless steel
• AG-900 - swing panel of 900 mm, stainless steel
• AG-1100 - swing panel of 1100 mm, stainless steel

Passage zone formation

The passage width of the swing gate is 700 mm.

It is recommended to install the swing gates based on the 12 people/minute peak load for each passage zone.

WMD-05S swing gate can be installed standalone or with other PERCo turnstiles. The swing gates can also be completed with railings produced in the same design.

Safety

If necessary, the built-in mechanical release key allows unblocking the swing gate and ensures free rotation of swing panels.

The control board provides emergency unblocking upon receiving the Fire Alarm signal (Fire Alarm input).

Swing gate operation

WMD-05S swing gates can operate as standalone units from RC-panel (included in the delivery set) or WRC (optional), and a part of an access control system (ACS).

The swing gate supports two control modes: pulse and potential. This control mode choice option ensures proper operation of the swing gate under access control system of any manufacturer.

The operation mode (passage permission and denial) can be set independently for each passage direction. The encoder built into the swing gate post records the actual fact of passage and its direction, which ensures correct accounting of working hours in access control systems.

The control board located in the swing gate post provides a complete set of control modes. The control board has inputs to connect sound indication (siren) and outputs to connect remote indication blocks.

When access is granted, the swing gate automatically opens in the authorized passage direction. Once the passage is complete, the swing panel smoothly returns to its home position.

Upon power loss, the built-in control unit ensures proper operation of the swing gate for 90 minutes or 1200 passages.