Русский
English
Deutsch
Français
Italiano
Español

Product news

Product news

In order to make PERCo products meet market demands company specialists are always working on their improvements.

In this section you can find information about the latest modifications of PERCo products.

Select by:
KT02.9 IP-Stiles
KT02.9 IP-Stiles
  • KT02.9 IP-Stile is designed to organize one double-sided access point to the enterprise and can operate both standalone without a constant connection to a local network of PC and as a part of PERCo-Web access control system.

    Key feature of KT02.9 is a possibility to organize an access control with simultaneous use of the following identifiers by employees (visitors):

    • Proximity access cards or transponders of HID / EM-Marin type with operation frequency of 125 kHz (reading the unique identifier UID);
    • Proximity access cards or transponders of MIFARE type (ISO/IEC 14443 A) (ID, Classic, Plus, Ultralight, DESFire) with operation frequency of 13,56 MHz reading:
      • either unique identifier (UID) of a card or transponder, factory setting;
      • or encrypted data from the inner memory of a card or transponder (to increase the security level, extra readers and cards programming is required).
    • Smartphones on Android OS with NFC function reading UID (IMSI);
    • Apple smartphones with NFC function reading UID (Token), connected to a bank card.

    All identifier types can be used by employees (visitors) at the same time.

ST-01 speed gate
ST-01 speed gate
  • Due to the possibility of scratches appearance on glass surface of ST-01 (STD-01) covers, rubber self-adhesive stickers for the card presentation places have been added to the delivery set. It is recommended to use them for ST-01, ST-02 with built-in RFID readers for long-term and intense operation. Client should apply them himself if necessary.
  • Please note that such glass damages are not considered as a warranty case!
  • Damages are caused either by external reasons while cards presentation (scratches from wallets, bags, bracelets, watches, rings, construction dust, etc.) or from using the aggressive detergents. Installation of the reader which reading range corresponds to the requirements from Operation Manual will reduce the risk of scratches appearance.
  • Please, note that scratches on ST-01 glass can be removed by professional surface polishing. If there is such need please contact PERCo support for advice.
KT02.7 IP-Stile

KT02.7 IP-Stile production has been stopped due to the launch of a new KT02.7M model with built-in Mifare readers with a possibility of reading the data from protected memory area to protect from copying.

IRP01 reader post
IRP01 reader post

IRP01 reader post – new modification IRP01.2 has been launched, the following changes have been made:

  • New indication design of the modes on LCD display,
  • within RS-485 it is possible to assign an address to the reader from 1 to 8 (via DIP-switches №1-3),
  • interface choice (RS-485 or Wiegand) is made via DIP-switch №4, Wiegand format choice – via switches № 1 and 2), indication option choice within Wiegand format – via switch №3.
Bracket
Bracket

In order to increase opportunities of various external equipment installation on PERCo equipment have been developed and launched:

  • BQ1 bracket to fix extra equipment (face recognition terminal, fingerprint or barcode scanners) on the front panel of ST-01 speed gate
  • BQ3 bracket to fix extra equipment (face recognition terminal, fingerprint or barcode scanners) on TTD-03.2 turnstile
  • BS1 bracket to fix Suprema biometric controllers on ST-01 speed gate
ST-01 Speed Gate
ST-01 Speed Gate
Upon the requests of users, in addition to the main modes of operation, a special "Automatic opening of the passage in the selected direction" mode has been introduced.
In this mode, the Swing Panels open automatically when entering the turnstile in one direction and immediately close after the passage is finished; in the other direction, the turnstile works according to the usual algorithm. The mode is activated by switches located on the Control Board.

If the product was purchased earlier, and the customer needs this new feature – it is possible to update the firmware of the controller, please contact our technical support. File with the latest version of the firmware: ST01771v9.bin
RTD-15, RTD-16 Full-Height Turnstiles
RTD-15, RTD-16 Full-Height Turnstiles
The delivery set includes a template made of fiberboard for marking on the mounting surface.
RTD-15, RTD-16 Full-Height Turnstiles
RTD-15, RTD-16 Full-Height Turnstiles
Reinforced wooden crates. Now it is possible to stack the same type of boxes up to 10 rows in a horizontal position.
ST-01 Speed Gate
ST-01 Speed Gate
The delivery set includes a template made of fiberboard for marking on the mounting surface.
ST-01 Speed Gate
ST-01 Speed Gate

The design of ST-01 Speed Gates has been improved:

a) The indication block is built directly into the section cover.

b) The indication control module has been added to the upper side of the housing.

It is now easier to install readers inside of the section and to switch the type of indication of the front end indication module (select "Arrow" or "Cross").

1 - 10 of 15
First | Prev. | 1 2 Next | Last