Product news

For ST-01 speed gate the production of ATG-475 glass panels has been launched. They provide comfortable passageway width of 1000 mm for disabled people (for free passage of people in wheelchairs etc.).

It is now possible to update the PCB firmware of the ST-02 Speed gate if it is necessary to increase the security level of the turnstile. This mode allows you to prevent injuries in emergency situations, such as abnormal behaviour of visitors and provides safe passage of children, animals, etc.

Reduced the thickness of the turnstile post flange from 12 mm to 8 mm. Accordingly, the overall height of the product changed from 1013 mm to 1007 mm.

Reduced the thickness of the swing gate post flange from 12 mm to 8 mm. Accordingly, the overall height of the product changed from 1012 mm to 1007 mm.

A new modified design allows to install turnstiles contiguously in a row what provides an opportunity for upper transit cable-laying through the turnstile top channels.

Besides, a new RTC-15.3 turnstile canopy was designed for this modification as well as brackets to connect turnstile with railings, swing gates, walls etc.

Attention! Modified turnstiles (serial numbers: 67хххххх) are compatible only with RTС-15.3 canopy, RTC-15 canopy is compatible only with RTD-15 turnstiles with serial numbers: 46хххххх.

• KT02.9 IP-Stile is designed to organize one double-sided access point to the enterprise and can operate both standalone without a constant connection to a local network of PC and as a part of PERCo-Web access control system.

  Key feature of KT02.9 is a possibility to organize an access control with simultaneous use of the following identifiers by employees (visitors):

  • Proximity access cards or transponders of HID / EM-Marin type with operation frequency of 125 kHz (reading the unique identifier UID);
  • Proximity access cards or transponders of MIFARE type (ISO/IEC 14443 A) (ID, Classic, Plus, Ultralight, DESFire) with operation frequency of 13,56 MHz reading:
    • either unique identifier (UID) of a card or transponder, factory setting;
    • or encrypted data from the inner memory of a card or transponder (to increase the security level, extra readers and cards programming is required).
  • Smartphones on Android OS with NFC function reading UID (IMSI);
  • Apple smartphones with NFC function reading UID (Token), connected to a bank card.

  All identifier types can be used by employees (visitors) at the same time.

• Due to the possibility of scratches appearance on glass surface of ST-01 (STD-01) covers, rubber self-adhesive stickers for the card presentation places have been added to the delivery set. It is recommended to use them for ST-01, ST-02 with built-in RFID readers for long-term and intense operation. Client should apply them himself if necessary.
• Please note that such glass damages are not considered as a warranty case!
• Damages are caused either by external reasons while cards presentation (scratches from wallets, bags, bracelets, watches, rings, construction dust, etc.) or from using the aggressive detergents. Installation of the reader which reading range corresponds to the requirements from Operation Manual will reduce the risk of scratches appearance.
• Please, note that scratches on ST-01 glass can be removed by professional surface polishing. If there is such need please contact PERCo support for advice.

In order to increase opportunities of various external equipment installation on PERCo equipment have been developed and launched:

• BQ1 bracket to fix extra equipment (face recognition terminal, fingerprint or barcode scanners) on the front panel of ST-01 speed gate
• BQ3 bracket to fix extra equipment (face recognition terminal, fingerprint or barcode scanners) on TTD-03.2 turnstile
• BS1 bracket to fix Suprema biometric controllers on ST-01 speed gate

IRP01 reader post – new modification IRP01.2 has been launched, the following changes have been made:

• New indication design of the modes on LCD display,
• within RS-485 it is possible to assign an address to the reader from 1 to 8 (via DIP-switches №1-3),
• interface choice (RS-485 or Wiegand) is made via DIP-switch №4, Wiegand format choice – via switches № 1 and 2), indication option choice within Wiegand format – via switch №3.